loading

Begin To Design & Manufacture Auto Pressure & Vacuum Forming Machine From 1998

The inevitability of film non-woven fabric development

The occurrence of anything or development, is the environment or is the inevitability of history. Drench membrane is widely used in the emergence of non-woven fabric and market, of course also cannot leave the objective and subjective aspects of necessity, a single product, the development of the industry as a whole, from junior to senior development is indispensable to any things a stage of development. First of all, the use of simple greenhouses non-woven fabric, has gone far can not meet now vegetable greenhouses planting insulation and other industries use requirements, in the same level, is far behind the needs of the development of the industry. Emergence and development of film non-woven fabric, is also should be appeared on the one hand, the demand of the development of environment and this, to what can be expected. The necessity of developing is a kind of objective. Second, non-woven fabric, to the development of an enterprise to occupy more larger share in the market, the development of new products this is a must. If blindly to the old products market, inevitable was eliminated by the market. Film development of non-woven fabric from the subjective aspect, one is to increase corporate profits, the second is also the needs of the development of enterprise products to multiple directions.

GET IN TOUCH WITH Us
recommended articles
Knowledge Info Center Exhibition

Vacuum compound molding technology is generally used in the plastics industry.

A vacuum type automatic cold and hot forming machine, including a machine unit formed with a heating space and a cooling space, a heating unit, a cooling unit, two vacuum door units, and two handling units, each vacuum door unit having a place The door frame of the machine unit, the door frame drive module, the vacuum door arranged on the door frame, and two vacuum door drivers for driving the vacuum door to move.

The vacuum blister molding process is a thermoforming processing method.

In the production process of carbon fiber composite materials, the vacuum liposuction method can produce large and simple products at low manufacturing costs, and obtain better quality.

① Use glass fiber roving instead of fabric, which can reduce material cost;

②The production efficiency is 2 to 4 times higher than that of hand lay-up;

③Good product integrity, no joints, high interlayer shear strength, high resin content, good corrosion resistance and leakage resistance;

④It can reduce the consumption of flashing, cutting scraps and remaining glue;

⑤The product size and shape are not restricted.

Its disadvantages are: ① high resin content,

(3) Resin transfer molding technology (RTM technology);

(4) Bag pressing method (pressure bag method) forming;

(5) Vacuum bag compression molding;

(6) Autoclave forming technology;

(7) Hydraulic kettle molding technology;

(8) Thermal expansion molding technology;

(9) Sandwich structure forming technology;

(10) Molded material production process;

(11) ZMC molding material injection technology;

(12) Compression molding process;

Vacuum forming (Vacuum Forming) is often called blister.
The vacuum forming machine is suitable for vacuum forming of ABS, PS, PE, PC, PP, PVC, HIPS, Acrylic, and other thermoplastic thick sheets with a thickness of 1-10mm, and can produce large-scale plastic products.

Let's take a look at the advantages of the vacuum forming machine:
The vacuum blister molding machine adopts a programmable controller control system.
More than 20 year experience on vacuum forming and auto pressure & vacuum forming machine

Contact Us

Tel: +86-754-88228822
Fax: +86-754-88584033
E-mail: mx1@stmengxing.cn
Address: Block 11, Jinyuan Industrial District, Chaoshan Rd. West, Shantou, Guangdong China
Copyright ©Shantou Mengxing Package Machinery Co.,Ltd.  2025 | Sitemap | Privacy Policy
Customer service
detect