loading

Begin To Design & Manufacture Auto Pressure & Vacuum Forming Machine From 1998

Simple introduced the working principle of packing tape production equipment

Plastic packaging machine is the production packing belt machine, also called packing belt production equipment. Packing belt production equipment main drive is made up of speed regulating motor, reducer, shaft sleeve. Forming part of the screw cylinder, the nose, mouth of mold. Raw materials through the hopper to squeeze in the early embryo screw cylinder heating. The first paragraph - the temperature control of the fuselage - - 120 degrees, the second paragraph - , and the third - 170 degrees - 220 degrees, 250 - the nose 280 degrees. Packing belt production equipment under the water tank on main machine and die early embryos after heating. Belting out the nose after high temperature, immediately enter the water cooling, because the equivalent gauge polypropylene in the case of quench easily generate Yun crystal structure, Yun crystal molecular structure is loose. Easy to stretch orientation, to gain high quality products. Packing tape production line, cooling water temperature control in the 30 - in general 40 degrees, packing belt production line mold head above the water distance of 15 It is advisable to 45 mm. Packing belt production equipment under secondary heating oven facilitate stretching; The purpose of the drawing is in order to improve the packing belt longitudinal strength, reduce the elongation. Packing belt production equipment on the oven heating three times to eliminate tensile stress; After thermal stress on the tank to eliminate stereotypes. Packing belt production equipment for the first traction by control motor, reducer, chain drive, traction roller. It is to finalize the design after the early embryos to the oven. Packing belt production equipment embossing machine motor drive is speed through the belt transmission, chain transmission, gear transmission to the second traction, the embossing, to the third traction. The second drawing heat secondary to the early embryo through the tension bar again stretch forming, conveying to the embossing roll at the same time; Stretching after you pack after two patterned roller, by pressure on the decorative pattern, its role is to increase friction in use, no sliding, viewed from the outside the beauty is generous. Through the embossing roll surface embossing after delivery of product to on the tank or on oven; Packing belt production equipment through a third traction roll feed water tank on the molding machine. You pack in advocate environmental protection is becoming more and more popular today, packing belt production equipment production will be as tight.

GET IN TOUCH WITH Us
recommended articles
Knowledge Info Center Exhibition

Vacuum compound molding technology is generally used in the plastics industry.

A vacuum type automatic cold and hot forming machine, including a machine unit formed with a heating space and a cooling space, a heating unit, a cooling unit, two vacuum door units, and two handling units, each vacuum door unit having a place The door frame of the machine unit, the door frame drive module, the vacuum door arranged on the door frame, and two vacuum door drivers for driving the vacuum door to move.

The vacuum blister molding process is a thermoforming processing method.

In the production process of carbon fiber composite materials, the vacuum liposuction method can produce large and simple products at low manufacturing costs, and obtain better quality.

① Use glass fiber roving instead of fabric, which can reduce material cost;

②The production efficiency is 2 to 4 times higher than that of hand lay-up;

③Good product integrity, no joints, high interlayer shear strength, high resin content, good corrosion resistance and leakage resistance;

④It can reduce the consumption of flashing, cutting scraps and remaining glue;

⑤The product size and shape are not restricted.

Its disadvantages are: ① high resin content,

(3) Resin transfer molding technology (RTM technology);

(4) Bag pressing method (pressure bag method) forming;

(5) Vacuum bag compression molding;

(6) Autoclave forming technology;

(7) Hydraulic kettle molding technology;

(8) Thermal expansion molding technology;

(9) Sandwich structure forming technology;

(10) Molded material production process;

(11) ZMC molding material injection technology;

(12) Compression molding process;

Vacuum forming (Vacuum Forming) is often called blister.
The vacuum forming machine is suitable for vacuum forming of ABS, PS, PE, PC, PP, PVC, HIPS, Acrylic, and other thermoplastic thick sheets with a thickness of 1-10mm, and can produce large-scale plastic products.

Let's take a look at the advantages of the vacuum forming machine:
The vacuum blister molding machine adopts a programmable controller control system.
More than 20 year experience on vacuum forming and auto pressure & vacuum forming machine

Contact Us

Tel: +86-754-88228822
Fax: +86-754-88584033
E-mail: mx1@stmengxing.cn
Address: Block 11, Jinyuan Industrial District, Chaoshan Rd. West, Shantou, Guangdong China
Copyright ©Shantou Mengxing Package Machinery Co.,Ltd.  2025 | Sitemap | Privacy Policy
Customer service