loading

Begin To Design & Manufacture Auto Pressure & Vacuum Forming Machine From 1998

Playing cup machine filter of key points

Depending on the cups printer products can be divided into baking cup machine, flat machine, oven, etc. , including tablet using the scope of the most extensive, meet various needs. Cup printing machine production process, the filter is very important, here small make up to make a brief introduction of the use of filter need to pay attention to what problem. Filter is a metal wire, steel wire is easy to rust, so should notice moistureproof, when saving the best preserved in the bag. If the screen pack rust, even serious point, in the process of extrusion, wire broken, can't filter impurities, will be mixed in extrudate rust or impurities. For single exhaust, secondary extrusion machine, filter the back pressure is too large, will cause the output of the second paragraph is reduced, so after a while, timely replacement filter, ensure production. In order to avoid the mesh filter to large impurities, resulting in failure, need to install alarm security system. The above is a note about playing cup machine filter.

GET IN TOUCH WITH Us
recommended articles
Knowledge Info Center Exhibition

Vacuum compound molding technology is generally used in the plastics industry.

A vacuum type automatic cold and hot forming machine, including a machine unit formed with a heating space and a cooling space, a heating unit, a cooling unit, two vacuum door units, and two handling units, each vacuum door unit having a place The door frame of the machine unit, the door frame drive module, the vacuum door arranged on the door frame, and two vacuum door drivers for driving the vacuum door to move.

The vacuum blister molding process is a thermoforming processing method.

In the production process of carbon fiber composite materials, the vacuum liposuction method can produce large and simple products at low manufacturing costs, and obtain better quality.

① Use glass fiber roving instead of fabric, which can reduce material cost;

②The production efficiency is 2 to 4 times higher than that of hand lay-up;

③Good product integrity, no joints, high interlayer shear strength, high resin content, good corrosion resistance and leakage resistance;

④It can reduce the consumption of flashing, cutting scraps and remaining glue;

⑤The product size and shape are not restricted.

Its disadvantages are: ① high resin content,

(3) Resin transfer molding technology (RTM technology);

(4) Bag pressing method (pressure bag method) forming;

(5) Vacuum bag compression molding;

(6) Autoclave forming technology;

(7) Hydraulic kettle molding technology;

(8) Thermal expansion molding technology;

(9) Sandwich structure forming technology;

(10) Molded material production process;

(11) ZMC molding material injection technology;

(12) Compression molding process;

Vacuum forming (Vacuum Forming) is often called blister.
The vacuum forming machine is suitable for vacuum forming of ABS, PS, PE, PC, PP, PVC, HIPS, Acrylic, and other thermoplastic thick sheets with a thickness of 1-10mm, and can produce large-scale plastic products.

Let's take a look at the advantages of the vacuum forming machine:
The vacuum blister molding machine adopts a programmable controller control system.
More than 20 year experience on vacuum forming and auto pressure & vacuum forming machine

Contact Us

Tel: +86-754-88228822
Fax: +86-754-88584033
E-mail: mx1@stmengxing.cn
Address: Block 11, Jinyuan Industrial District, Chaoshan Rd. West, Shantou, Guangdong China
Copyright ©Shantou Mengxing Package Machinery Co.,Ltd.  2025 | Sitemap | Privacy Policy
Customer service
detect