loading

System cup machines, common problems

by:Mengxing     2020-03-10
Oil, paper cup machine, at bottom, sealing, knurling, preheating, heat, double bottom, v edge and out of the cup will paper cups. Complete paper cup molding and its transmission and finely the main part of the plan, this part mainly by sweeping the heating of paper cups, preheating, knurling, double bottom, edge and a refund process. Making a cup of machine this part of the action is primarily a CAM mechanism, course four-bar linkage, intermittent mechanism etc. This article will to elucidating the system born cup machine manufacturing process, making a cup of machine transmission rules of attention, and in this according to the uplink transmission planning combined of finely machine and sheet machine, mainly for belt drive, CAM drive, chain drive, preference indexing CAM wheel transmission, surface combined intermittent mechanism and main shaft development detailed planning. This automatic system cup machine smaller power consumption, reasonable structure, convenient operation, high efficiency, stable performance, to the increasing market demand to meet the further at present. Cup machine packaging process including wrapping package, filling, sealing, such as process, and its related process, such as stacking, clean and remove, etc. In addition, system cup machines package also includes measurement and is imprinted on the package process and use lid machine. Packed in mechanical products can increase productivity, reduce the labor, the need for mass production is very suitable for, clean sanitation requirements can be up to standard. There are many sheet machine packaging machinery classification method. From function points can be divided into single-use packaging machine and multi-function packaging machine; And from the varieties of packaging can be divided into special packing machine and general packaging machine; From the purpose can be divided into the inner packaging machine and packaging machine; From the level of automation can be divided into half automata and automata, etc. Equipment membrane materials are prone to offset at work and there's no way to normal feeding how to adjust? If you encounter in the equipment of the membrane material migration happens, adjusted roller position and tension balance beam under the condition of no effect, by adjusting the Angle of the triangle can solve this problem. The upper membrane deviating from the clip material chain, for example, can be set square to the clockwise adjust; Deviating from the clip material chain, such as the lower film on triangle counterclockwise direction adjustment can solve this problem. If system cup machines in packing of 6 bottles of cluster, magic eye there is no way to detect packing materials, and the machine is easy to cut packaging to at work how to deal with? Cluster of each bottle packaging clearance affect magic eye detection, then it can be horizontal electric eye detection Angle adjustment for bevel. Adjusted may reduce the risk of BOPS hot forming machine to packaging clearance, cut can not get work disorderly phenomena appear.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...