Stretch film machine lubrication is the key to the parts need to be working

For stretch film machine, the lubrication is the key to the parts need to be working, but the equipment at the time of lubrication, some aspects need to be paid attention to, the following is the detailed introduction. ( 1) . Timing to wrap packaging machine the gear mesh, arrange ushering bearing oiling hole and filling oil lubrication, all moving parts per shift time, to do, day after day, insist to have effect, in line with the responsible for the equipment and provide technical support for the later work smoothly. ( 2) . When filling oil for pallet stretch film machine, please pay attention to don't put the oil on the belt, to prevent causing slippage belt premature aging turn lost or damaged. ( 3) . Automatic winding machine of the reducer is an important part of the equipment in the reducer are strictly prohibited without oil, after 300 hours of operation for the first time cleaning internal change new oil, then each work 2500 hours in oil, this phenomenon is the same, must be seriously implemented. For all parts, lubrication work is very important for the lubricating oil quality also need our attention, for example, in - 5 ℃ to 10 ℃ environment using industrial gear oil ISO VG150, at the time of 10 ℃ to 40 ℃ using industrial gear oil N320, can achieve ideal lubricating effect. Automatic stretch film machine should pay attention to when using lifting frame chassis and membrane, because proper use of automatic winding machine can not only ensure the normal operation of equipment, can also extend the service life of these components of equipment operation, so when use to use as required.