Making a cup of machine packaging some common problems
Cup machine packaging process including filling sealing, wrapping package, such as the main working procedure, and the relevant process before and after, such as clean, stacking and remove.
In addition, the system package also includes measuring cup machine or stamp on the package process.
Using mechanical packing product can increase productivity, reduce labor intensity, adapt to the needs of mass production, and meet the requirements of clean sanitation.
There are many classification method sheet machine packaging machinery.
According to the function can be divided into single-use packaging machine and multi-function packaging machine;
According to the purpose can be divided into the inner packaging machine and packaging machine;
According to the varieties and packaging can be divided into special packing machine and general packaging machine;
According to the automation level is divided into half automata and automata, etc.
Some customers ask shrinking machine heat up slowly or can't rise to high temperature (
More than 160 degrees Celsius)
What reason be?
Heater circuit is the main power cord through a vacuum magnetic switch to electric heat pipe, so first inspection suction magnetic switch contact is normal.
Such as line does not through one of the phase, can appear the above phenomenon.
Such as magnetic switch to normal absorption, and then check meters, see lid machine and various phase of ohmic values are the same.
If normal should be short circuit.
As each phase are connected lines or electric heat pipe still abnormal, need to replace the heater.
Still have some questions is equipment membrane material easy shift at work and unable to feed how to adjust?
Encountered in devices such as membrane material, adjusted tension roller position and balance beam were invalid cases, can be adjusted through the Angle of the triangle to solve this problem.
Deviating from the clip material chain such as the upper membrane, can be on the triangle clockwise to adjust;
The following membrane deviating from the clip material chain, can adjust the triangle to counterclockwise.
If packing of 6 bottles of cluster system cup machine, electric eye cannot detect packaging, machine work easy to cut to the packaging, how to deal with?
Cluster of each bottle packaging gap will affect the electric eye detection, then level can be magic eye detection Angle adjustment for bevel.
Adjusted may reduce the risk of BOPS hot forming machine to packaging clearance, to avoid disorderly cut phenomenon arising from the work.