Safety considerations granulator

Pelleting machine is a kind of material can be made into specific shapes of molding machinery. Widely used in chemical, petrochemical, pharmaceutical, food, building materials, mining and metallurgy, environmental protection, printing and dyeing, ceramics, rubber, plastic, etc. In any mechanical equipment is in use, must put safety first, then the granulation machinery when use should pay attention to what? First, the operating personnel when packing, must look good, don't go into sundry, mastering the temperature. Second, water temperature should be in the 50 - commonly - - Article 60 ℃, low easily broken, beyond easy adhesion, had better add half when the phone is switched on at the beginning of hot water, such as no conditions, when the granule of choose and employ persons to pelletizing machine for a period of time, such as water temperature rise again after the automatic dicing, lest breaks, after more than 60 ℃, water temperature to the inner loop in cold water, to keep temperature. Third, opening, granulating machine, if the material is not a bar, the phenomenon of the sticky die, die temperature is too high, wait a cooling can be normal, usually don't have to stop. Fourth, cut grain must pull the ability after all into the roller, otherwise will damage the dicing machine. Taking material such as a vent to the outside for play, that the impurities have been blocked filter, then speed outage replacement mesh, mesh 40 - optional - - 60 mesh.