Automatic boxes machine product introduction
by:Mengxing
2020-02-27
Automatic boxes machine processing products is used in the food industry, paper boxes so very strict sanitation, cleanliness requirements is very high, and therefore the system actuator (
In addition to the drive motor)
Adopt pneumatic components.
Boxes machine of high degree of automation, sequence control is strict, so generally USES the programmable controller (
PLC)
As control core, so it can be a very good control system requirements.
Boxes machine automation and the device a simple introduction is as follows: 1, the working process: paper - brake paper - rapid paper - heat - into the forming die and stable molding to finished product, finished product automatic accumulation.
Because the machine USES the air valve control, so before work you must first start pump and have a certain pressure conditions.
2, feed system, the paper have to flatter the slots on the paper and upper trough a level detection device, the paper to paper a certain amount of reserves, if lack of paper will automatically alarm, below the level limit value the opportunity to automatically stop.
3, safety protection device: to prevent the accident, the workbench beneath the forming die is equipped with infrared protection controller, when there is a foreign body, forming dies not down, and send out alarm signal.
4, mode of operation: boxes machine for fully automatic operation, when the paper slot stacking height is greater than the level required value, the machine under normal condition can press start button can work fully automatic machine.
5, for recording the output: at any time can be preset and display products.
Custom message