Vacuum forming machine appear problem, here for you to solve

What is vacuum forming machine? Thick slices of vacuum forming machine is to heat the plasticizing of PVC, PE, PP, PET, HIPS, thermoplastic plastic coil made into various shapes of advanced packaging decoration machine box, box, and other products. And we all know, machine can't talk, don't like humans can describe what there uncomfortable, the doctor which suit the remedy to the case. The machine? Don't open machine do? Don't try so hard, take a look at the code and nanjing CNC machinery co. , LTD. , how to say, go and have a look. We can through the machine's condition to determine the vacuum forming machine is where there is a problem. As if is the machine does not start, you'd better check whether the input wire impassability, power cords or is caused by voltage is not enough; In temperature measurement is not accurate, then you should check the puppets and tropical temperature controller installed is correct or whether any damage; In total consideration when the tripping happens in the power switch, should first check the heating box input wire, such as distribution box and motor whether leakage and check to see if any external wire set on the device; Appear not to the time of membrane absorption downward pull litre, should check the solenoid valve or valve is on hand; In the event of a broken absorption phenomenon, should start with the heating time is too long, film quality is not good, and no heating consideration; If membrane absorption does not reach the designated position, may be vacuum degree is not enough, leakage, temperature is not high, the film is too thin, work-piece posted on other materials, concave depth over the lift of membrane and the time is too short, membrane absorption did not pull litre, artifacts caused by too close.