Automatic vacuum molding machine introduced how to use the vacuum forming machine is more suitable

Automatic vacuum molding machine introduced how to use the vacuum forming machine is more suitable: prior to the start, carefully check the machine power supply and control system, heating system, whether normal, add lubricant, according to need, 自旋) Button is in the right place, according to the requirement of the test run. Second, the correct die is installed in a vacuum forming machine. Third, the raw materials need to be dry, should be in accordance with the provisions in the drying oven. Four, check whether the raw material is accord with the requirements of the machine to use. Five, the set of variable parameters, according to the actual circumstances of the module, clamping and various parameters, such as until the normal operation of the mould and the smooth and safe. Six, according to the thickness of the material processing and set the required temperature, mould preheating. Seven, material parameters (temperature, mold temperature need Requirements) , before loading, feeding should be carefully check whether there is impurities inside the mold and sundry, hard alloy moulds is prohibited. Eight, and observe the rehearsal material deformation condition, the adjustment of parameters according to it, the vacuum molding machine until it is smooth, colour and lustre is uniform, meet the requirements. Nine, should pay attention to the temperature at any time in the process of operation, the change of the pressure, if discovery is unusual, should stop, turn off the power supply of mechanical parts to repair, recover after use.